WF2000 flange end face processing machine is a portable and efficient product. The machine adopts internal clamping method and is fixed in the middle of the pipe or flange. It can process various forms of inner hole, outer circle, flange sealing surface (RF,RTJ, etc.). The whole machine adopts modular design, easy to install and disassemble, equipped with pre-tightening braking system, capable of intermittent cutting, unlimited working direction, high productivity and low noise. Widely used in cast iron, alloy structural steel, stainless steel and other metal materials flange sealing surface repair, flange surface repair and processing.
technical parameters:
| Machine Model |
WF2000 |
| Minimum Processing Range |
Ø690mm |
| Maximum processing range |
Ø2200mm |
| Minimum clamping range |
Ø690mm |
| Maximum clamping range |
Ø2000mm |
| speed |
0-20RPM |
| tool holder |
100mm |
| flatness |
≤ 0.1mm |
|
Power Plant |
Pneumatic/Servo Motor |
| Motor power |
3KW,220V/ 0.8-1.0MPa, flow rate 2.69 m/min |
| machine net weight |
500KG |
performance introduction:
